Connecting your PC (either desktop computer, Mac, or Laptop) to your TV has become an extremely popular requirement, especially with the growth of video streaming by companies such as NetFlixTM which now allow customers to download or stream video directly to one's PC. Connecting your PC to a TV can be a very simple and straight forward task if your TV has the appropriate input connection.
Many newer PCs (desktops, laptops, and Mac's) have state-of-the-art video outputs - including DVI-D, HDMI, and now "DisplayPort" (DP).
The below chart will help determine which cable - or converter box - will be suitable for this task. Our solutions are offers from "best image quality to worst". The solutions are strictly dependent on the video output port that your computer has, and the video input port that your TV has. Don't forget the audio!
The GVS72 is a 2-port VGA video splitter and a signal booster with IOGEAR's patented VSE (Video Signal Enhancement) Technology. It is the best choice for splitting and carrying a video signal to more that one display with the same quality as the original signal. The GVS72 VGA Video Splitter is used to take video input from a single source and direct it to two video outputs for monitors using analog signals.
The signal boost obtained by using IOGEAR's patented VSE (Video Signal Enhancement) Technology allows you to not only split the signal but it also amplifies the video signal to increase the transmission distance to about 215 feet away. This is no small feat, your average VGA card, over a standard VGA cable, sends a clear VGA signal approximately 25 feet.
Operating with a bandwidth of 350MHz (350 million cycles per second) that is almost 60 times greater than a simple TV signal. The high bandwidth allows for the transmission of large amounts of information at a very high rate of speed, thus allowing for the use of high resolution settings upwards of 1920 x 1440 in 24 or 32 bit true color mode.
Overview
Share or extend your VGA video to multiple monitors. Setup is fast and easy--just plug-in the included VGA cable from your computer's VGA output to the video splitter's input and connect each monitor to the splitter directly and you are all set. AVS02 has a high bandwidth of 350MHz to support high quality video and resolution of up to 1920x1440. It is also daisy-chainable to support more monitors. This is great for trade shows, seminars, and stores.
Extend Your Desktop
Extend your desktop with high-resolution dual display support. The VGA splitter supports Mirror mode with widescreen monitor resolutions up to 1920x1440. View applications and data simultaneously across multiple screens. The AVS02 can amplify your VGA signal to transmit over distance of up to 210 feet--that is 8 times farther than the support of a typical video card.
Simple to Use
The VGA splitter is completely plug-and-play, hot-swappable, and hot-pluggable, with no driver installation needed. Connect the VGA output from your computer to the VGA IN port of AVS02 with the included VGA cable. Then connect the VGA output of the video splitter to each monitor using the monitor's cables (not included). In no time, you will able to share or extend the distance of your VGA video to multiple monitors.
Features
Split VGA signals into 2 outputs
Amplify the VGA signal to transmit over distance of up to 210 ft. - that is 8 times farther than the support of a typical video card
High signal bandwidth of 350MHz to support high quality video
Daisy chainable to increase monitor support
Supports VGA, SVGA and Multi-Sync monitors
Plug-n-Play, No driver needed
Limited 5 Year Warranty
Many newer PCs (desktops, laptops, and Mac's) have state-of-the-art video outputs - including DVI-D, HDMI, and now "DisplayPort" (DP).
The below chart will help determine which cable - or converter box - will be suitable for this task. Our solutions are offers from "best image quality to worst". The solutions are strictly dependent on the video output port that your computer has, and the video input port that your TV has. Don't forget the audio!
The GVS72 is a 2-port VGA video splitter and a signal booster with IOGEAR's patented VSE (Video Signal Enhancement) Technology. It is the best choice for splitting and carrying a video signal to more that one display with the same quality as the original signal. The GVS72 VGA Video Splitter is used to take video input from a single source and direct it to two video outputs for monitors using analog signals.
The signal boost obtained by using IOGEAR's patented VSE (Video Signal Enhancement) Technology allows you to not only split the signal but it also amplifies the video signal to increase the transmission distance to about 215 feet away. This is no small feat, your average VGA card, over a standard VGA cable, sends a clear VGA signal approximately 25 feet.
Operating with a bandwidth of 350MHz (350 million cycles per second) that is almost 60 times greater than a simple TV signal. The high bandwidth allows for the transmission of large amounts of information at a very high rate of speed, thus allowing for the use of high resolution settings upwards of 1920 x 1440 in 24 or 32 bit true color mode.
Overview
Share or extend your VGA video to multiple monitors. Setup is fast and easy--just plug-in the included VGA cable from your computer's VGA output to the video splitter's input and connect each monitor to the splitter directly and you are all set. AVS02 has a high bandwidth of 350MHz to support high quality video and resolution of up to 1920x1440. It is also daisy-chainable to support more monitors. This is great for trade shows, seminars, and stores.
Extend Your Desktop
Extend your desktop with high-resolution dual display support. The VGA splitter supports Mirror mode with widescreen monitor resolutions up to 1920x1440. View applications and data simultaneously across multiple screens. The AVS02 can amplify your VGA signal to transmit over distance of up to 210 feet--that is 8 times farther than the support of a typical video card.
Simple to Use
The VGA splitter is completely plug-and-play, hot-swappable, and hot-pluggable, with no driver installation needed. Connect the VGA output from your computer to the VGA IN port of AVS02 with the included VGA cable. Then connect the VGA output of the video splitter to each monitor using the monitor's cables (not included). In no time, you will able to share or extend the distance of your VGA video to multiple monitors.
Features
Split VGA signals into 2 outputs
Amplify the VGA signal to transmit over distance of up to 210 ft. - that is 8 times farther than the support of a typical video card
High signal bandwidth of 350MHz to support high quality video
Daisy chainable to increase monitor support
Supports VGA, SVGA and Multi-Sync monitors
Plug-n-Play, No driver needed
Limited 5 Year Warranty
